Delta Tau Geo Direct PWM Amplifier Instalační manuál stáhnout pdf (Strana 43)

Geo Direct PWM Amplifier

Turbo PMAC2 Drive Setup 43

TURBO PMAC2 DRIVE SETUP

Caution

The ADC Strobe Word, I7m06 ($C014 in Non-Turbo PMAC), must

be set to $3FFFFF for proper operation in default mode. Failure to set

I7m06 equal to $3FFFFF could result in damage to the amplifier.

Key Gate Parameters

The following Gate-specific parameters are essential for the proper software setup of the Geo Direct

PWM Drive:

Turbo

Non-Turbo

Description

Typical/Default

Notes

I7m00

I900

Max phase clock

6527

4.50 KHz PWM

I7m01

I901

Phase clock divider

9.00 KHz Phase

I7m02

I902

Servo clock divider

2.25 KHz Servo

I7m03

I903

Hardware Clocks

2258

2.50 MHz ADC Clock

I10

Servo interrupt time

3713991

I7m06

X:$C014

ADC Strobe Word

$3FFFFF

Default Mode

I7mn6

I9n6

Output mode

PWM output

Note

Non-Turbo ADC Strobe words are at addresses X:$C014 for axis 1-4

PMAC2 Gate), and X:$C024 for axis 5-8 (2

PMAC2 Gate).

Note

The servo interrupt time I10 must be re-computed if the main clocks

(Phase, PWM, and Servo) are changed.

Note

The above settings require a Save and a Reset ($$$) on the PMAC

side in order to take effect.

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 52 53

Komentáře k této Příručce

Žádné komentáře

Delta Tau Geo Direct PWM Amplifier Instalační manuál Strana 43

Komentáře k této Příručce

Související produkty a manuály pro Audio zesilovače Delta Tau Geo Direct PWM Amplifier