
PMAC2A-PC104 Hardware Manual
Acc-1P Connector Pinouts
56
J2 (JTHW): Multiplexer Port
Connector
(26-Pin Connector)
Front View
Pin# Symbol Function Description Notes
1 GND Common PMAC Common
2 GND Common PMAC Common
3 DAT0 Input Data-0 Input Data input from multiplexed
accessory
4 SEL0 Output Select-0 Output Multiplexer select output
5 DAT1 Input Data -1 Input Data input from multiplexed
accessory
6 SEL1 Output Select -1 Output Multiplexer select output
7 DAT2 Input Data -2 Input Data input from multiplexed
accessory
8 SEL2 Output Select -2 Output Multiplexer select output
9 DAT3 Input Data -3 Input Data input from multiplexed
accessory
10 SEL3 Output Select -3 Output Multiplexer select output
11 DAT4 Input Data -4 Input Data input from multiplexed
accessory
12 SEL4 Output Select -4 Output Multiplexer select output
13 DAT5 Input Data -5 Input Data input from multiplexed
accessory
14 SEL5 Output Select -5 Output Multiplexer select output
15 DAT6 Input Data -6 Input Data input from multiplexed
accessory
16 SEL6 Output Select -6 Output Multiplexer select output
17 DAT7 Input Data -7 Input Data input from multiplexed
accessory
18 SEL7 Output Select -7 Output Multiplexer select output
19 N.C. N.C. No Connection
20 GND Common PMAC Common
21 N.C. Output Buffer Request Low is "BUFFER REQ."
22 GND Common PMAC Common
23 N.C. Output In Position Low is "IN POSITION"
24 GND Common PMAC Common
25 +5V Output +5VDC Supply Power supply out
26 N.C. Input PMAC Reset Low is "RESET"
The JTHW multiplexer port provides 8 inputs and 8 outputs at TTL levels. While these I/O can be used in
unmultiplexed form for 16 discrete I/O points, most users will utilize PMAC software and accessories to
use this port in multiplexed form to greatly multiply the number of I/O that can be accessed on this port.
In multiplexed form, some of the SELn outputs are used to select which of the multiplexed I/O are to be
accessed.
Komentáře k této Příručce